Home> Industry News> Installation and precautions of shower head!

Installation and precautions of shower head!

January 05, 2023
1. The distance between the hot and cold water outlets is 13-15/cm and parallel and vertical. The constant temperature shower requires that the water outlets must be hot on the left and cold on the right. The water outlet cannot be recessed more than 0.5cm into the tile surface.

2. Run the water for 15 seconds to clean the sediment and impurities in the pipeline to avoid clogging the valve core.

3. When installing the main body, pay attention to check whether there are 6-point water sealing gaskets. A rag must be used when securing the nut to prevent scratching the surface.

4. Open the water valve, check whether there is water leakage at the curved angle joint, and the water outlet of the main body.


Installation and precautions of shower head!


5. When drilling the fixed pole, you must ask the customer whether there are water pipes and wires at the drilling position, so as to avoid breaking the pipeline and causing unnecessary losses.

6. When inserting the vertical poles, pay attention to whether the sealing water O-ring is deformed, and the overlap of the two pipes should be deep enough to prevent water leakage caused by the overlap being too short.

7. Tighten the pulling screw of the pole to prevent the water pressure from rushing out of the pole and damaging the ceiling of the customer's home.

8. After the installation is completed, it is necessary to check again whether there is water leakage at each interface.

After purchasing a shower, bathtub, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must be 15 cm. Don't forget to flush the water pipe before installation, so as not to cause damage to the faucet due to excessive water quality. If the elbow between the faucet and the wall joint is too long, you can cut off a part of the 4-point end, and remember that the 6-point connection with the faucet cannot be cut randomly.

Moonshower was established in 2006. Specialized in producing a great number of Metal shower head, Concealed shower mixer, Shower Column and Slide Rail with different styles.For more details about the product, please contact us:
Tel :86-0750-3850280
Mobile Phone :+8613923088590
Email :jack.qin@moon-shower.cn
Contact Us

Author:

Mr. David Wang

Phone/WhatsApp:

+86 19148065898

Popular Products
You may also like
Related Information
Is it possible to have a thermostatic shower?

The thermostatic shower valve set is indeed a convenient solution for controlling water temperature in the shower. With a thermostatic faucet, you won't need to manually adjust the water temperature...

How to use thermostatic faucet

The thermostatic faucet shower is designed to meet the demand for continuous hot water and is generally considered easy to use. With the thermostatic regulating shower valve core, the faucet can...

How to choose the shower head shower

The shower head is the shower head used to take a shower in the bathroom. Although it is more comfortable to take a bath in the bathtub, the bathtub is not only water-consuming, it is not easy to...

Shower shower switch valve is broken How to do a shower Which brand is good

There may be various problems when the If the shower switching shower valve is broken, there are a few steps you can take to address the issue. 1. Purchase a replacement valve: Look for a valve of...

Related Categories

Email to this supplier

Subject:
Mobile:
Email:
Message:

Your message must be betwwen 20-8000 characters

Copyright © 2024 JANGMEN MOON SHOWER SANITARYWARE CO.,LTD All rights reserved.Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send