How to open the shower head shower head cleaning steps and precautions

All products need to be maintained after a certain period of use, and what we need to know today is the Shower Head. After the shower head is used for a period of time, it is easy to block or the bath water flow becomes smaller. At this time, it is necessary to clean or replace the Shower Head and Hand Shower. Then how do shower heads clean and wash? Shower head cleaning steps and precautions are what? Followed by Moon Shower together to understand it.

First, how to open the shower head

There are many styles of showers, so the method of removing the shower heads must be decided according to the specific structure of the shower head.

1. Normally the hand can be disassembled by rotating it counterclockwise, without using special tools.

2, there is a small round cover in the sprinkler head in the middle, with a word to open the small cover can see the screw, to see what the mouth of the screw, with the appropriate screwdriver can be split flower head .

Second, how to wash the shower head

1, cleaning shower head

Use the needle to open the blocked outlet hole one by one.

2, cleaning shower nozzle inside

Remove the water pipe head connected to the shower head, use the water in the Shower Faucet to wash the shower head backwards, and then fill it with water, block the water inlet, shake it vigorously, and quickly discharge the dirty water. Repeat this several times. This method is suitable. Cleaning shower. If the shower head can be disassembled, it is very simple to clean the interior. Such as the Brass Shower Head can loosen the screw in the back plate. Simply remove the flower head and rinse it with tap water.

Third, the shower head precautions

1, the main raw materials for cleaning the shower head, usually choose white vinegar, which is more common home life, so it is also more convenient to use. First of all, after removing the showerhead, put it in a small pot filled with white vinegar. After soaking for about two hours, brush it carefully with a toothbrush and rinse it with clean water.

2. When washing the rain head, do not use strong acid products because it will cause corrosion on the surface of the shower. In order to ensure that the shower head is not blocked, it is better to wash the shower head for half a year or less, so that there will be no sudden blockage affecting the bathing situation.

3, in order to extend the life of the shower head, it is best not to be installed directly under the Yuba, it is best installed in the distance from the Yuba 60cm or more is the best; often with a soft cloth and a little flour to wipe the surface of the shower, you can Keep your shower clean as new.

Summary: The above is Moon Shower's introduction on how to open the shower head and how to clean the shower head. After reading this article, how do you know how to open the shower head? Do you have any control over the shower head? You should do this, oh, do you master the skills?